no ATM
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/cit.pdf
""Jason Roysdon"" <[EMAIL PROTECTED]> wrote in message
901gmd$j2i$[EMAIL PROTECTED]">news:901gmd$j2i$[EMAIL PROTECTED]...
> Anyone recall any ATM troubleshooting on the CIT? Brainbuzz.com lists it
as
> something to know. I know I can hit Cisco's site and find a ton of ATM
info
> (but I'm not ready to take that leap if I can avoid it), so if this is
> something I need right now for the CIT, does anyone have any concise ATM
> info/debug? The limit of my knowledge of ATM is just a few 1417's that I
> did for some ADSL customers, before the word that they were getting phased
> out and we started using 1605R's. These commands I used look vaguely
> familiar. If I know these and know what's in a few show int & pvc
commands,
> should I be ok?
>
>
> Anyway, here's the cookie-cutter config that I used for all those 1417's
> once TAC walked me through the first one:
> bridge irb
> interface ATM0
> atm vc-per-vp 64
> no atm ilmi-keepalive
> !
> interface ATM0.1 multipoint
> pvc 0/35
> ! can be pvc 8/35 w/ PBI/SBC as well
> !
> bridge-group 1
> !
> interface BVI1
> mac-address 0000.0c6c.9bbc
> bandwidth 1500
> ip address 63.100.100.100 255.255.255.252
>
>
> --
> Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
> List email: [EMAIL PROTECTED]
> Homepage: http://jason.artoo.net/
> Cisco resources: http://r2cisco.artoo.net/
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
