I had similar "copy tftp flash" problem, except when I tried to use this
command I got the "read only file-system" message. I booted into the ROM
monitor and the command worked fine. Just a suggestion form a newbie to
this group.
David
----- Original Message -----
From: Ole Drews Jensen <[EMAIL PROTECTED]>
To: Ole Drews Jensen <[EMAIL PROTECTED]>; 'Jeff Duchin'
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, November 29, 2000 9:50 AM
Subject: RE: copy tftp flash on 2501
> I'm sorry, I am not all awake yet.
>
> There are not that many sockets in the 2500 for flash memory, so let me
redo
> my reply.
>
> It looks like the memory module you have (added) in the 2nd flash memory
> socket is bad. Make sure it's compatible.
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 29, 2000 8:18 AM
> To: 'Jeff Duchin'; [EMAIL PROTECTED]
> Subject: RE: copy tftp flash on 2501
>
>
> This looks like you have just added 4 extra memory modules in your router
> that is not compatible.
>
> If you do a show flash, does it recognize the new memory, does it come up
> with the original amount, or does it show errors?
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Jeff Duchin [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 29, 2000 7:41 AM
> To: [EMAIL PROTECTED]
> Subject: copy tftp flash on 2501
>
>
> Any suggestions?
>
> Router(boot)#copy tftp flash
> Flash: chip no 4, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 5, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 6, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 7, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: unable to configure flash for erase or write.
> Flash address space cannot be written to.
> Memory type is Read-Only-Memory. Chips are not identifiable.
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
