apart from the possibility that one of your modules may be bad/incompatible,
25xx flash is configured to 'read-only' by default.
if you need to upgrade, erase or whatever you need
to change the register setting to get the router to boot
from rom rather than flash (0x2101), do what needs to be done and
change the register back to the original setting (0x2102).
'Show ver' will tell you what the register is currently set to.
check out the following link:
http://www.cisco.com/warp/public/620/6.html
hth,
Derek Lewinson
------------------
"With God, ALL things are possible"
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
David Letchumanan
Sent: 29 November 2000 18:07
To: Ole Drews Jensen; 'Jeff Duchin'; [EMAIL PROTECTED]
Subject: Re: copy tftp flash on 2501
I had similar "copy tftp flash" problem, except when I tried to use this
command I got the "read only file-system" message. I booted into the ROM
monitor and the command worked fine. Just a suggestion form a newbie to
this group.
David
----- Original Message -----
From: Ole Drews Jensen <[EMAIL PROTECTED]>
To: Ole Drews Jensen <[EMAIL PROTECTED]>; 'Jeff Duchin'
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, November 29, 2000 9:50 AM
Subject: RE: copy tftp flash on 2501
> I'm sorry, I am not all awake yet.
>
> There are not that many sockets in the 2500 for flash memory, so let me
redo
> my reply.
>
> It looks like the memory module you have (added) in the 2nd flash memory
> socket is bad. Make sure it's compatible.
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 29, 2000 8:18 AM
> To: 'Jeff Duchin'; [EMAIL PROTECTED]
> Subject: RE: copy tftp flash on 2501
>
>
> This looks like you have just added 4 extra memory modules in your router
> that is not compatible.
>
> If you do a show flash, does it recognize the new memory, does it come up
> with the original amount, or does it show errors?
>
> Hth,
>
> Ole
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> http://www.oledrews.com/ccnp
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> NEED A JOB ???
> http://www.oledrews.com/job
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> -----Original Message-----
> From: Jeff Duchin [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 29, 2000 7:41 AM
> To: [EMAIL PROTECTED]
> Subject: copy tftp flash on 2501
>
>
> Any suggestions?
>
> Router(boot)#copy tftp flash
> Flash: chip no 4, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 5, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 6, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: chip no 7, socket SIMM2
> Invalid chip id 0xFFFF
> Flash: unable to configure flash for erase or write.
> Flash address space cannot be written to.
> Memory type is Read-Only-Memory. Chips are not identifiable.
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
