Try version 5.4.2 with the following commands.
set ip http server disable
set ip http port 80
Scott
-----Original Message-----
From: Adrian Chew [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 29, 2000 7:38 AM
To: [EMAIL PROTECTED]
Subject: Re: Cat 4000 Switch
You might need a newer version of the software - look for those with
CV/CiscoView. You also need the Java client on your PC as you do with the
2900/3500XL series switches for HTTP based management. If you can't find
info in the docs, look at the latest product software version release notes.
That's why all the new feature documentation usually lies.
Regards,
Adrian
""Paul Wiliams"" <[EMAIL PROTECTED]> wrote in message
902ifq$uei$[EMAIL PROTECTED]">news:902ifq$uei$[EMAIL PROTECTED]...
> I've downloaded the complete Cat 4000 Switch manual, but cannot find the
> command to enable management via http. I've been advised that its
available
> when set. ANy ideas?
>
> btw <<<<another newbie so be nice!
>
> Paul Williams
> Eurobet
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
