As you can see the DLCI 16 is DELETED !
This means that DLCI 16 does not exist !
Regards
----- Original Message -----
From: "Adele Galus" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 30, 2000 7:15 AM
Subject: Frame Relay - Real Life Problem
> This is a configuration problem.
>
> Situation: I have two ISP's involved. The router is a 2500 series.
> Internal CSU/DSU.
> On DLCI 17 ISP traffic routes. The other DLCI 16 doesn't. Information
> is correct -
> I must be missing something.
>
>
================================================================================
====
>
> Cormick#show frame-relay map
> Serial0.16 (down): point-to-point dlci, dlci 16(0x10,0x400), broadcast
> status deleted
> Serial1.1 (up): point-to-point dlci, dlci 17(0x11,0x410), broadcast,
> IETF
> status defined, active
>
>
================================================================================
====
>
> Cormick#show frame-relay pvc
>
> PVC Statistics for interface Serial0 (Frame Relay DTE)
>
> DLCI = 16, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
> Serial0.16
>
> input pkts 0 output pkts 4 in bytes 0
> out bytes 1794 dropped pkts 0 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 4 out bcast bytes 1794
> pvc create time 9w3d, last time pvc status changed 7w4d
>
> PVC Statistics for interface Serial1 (Frame Relay DTE)
>
> DLCI = 16, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial1
>
> input pkts 0 output pkts 0 in bytes 0
> out bytes 0 dropped pkts 0 in FECN pkts 0
> in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 0 out bcast bytes 0 Num Pkts
> Switched 0
> pvc create time 9w3d, last time pvc status changed 7w4d
>
> DLCI = 17, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial1.1
>
> input pkts 73176244 output pkts 63755322 in bytes 2986909822
> out bytes 4214766293 dropped pkts 239 in FECN pkts 273970
> in BECN pkts 254655 out FECN pkts 0 out BECN pkts 0
> in DE pkts 940978 out DE pkts 0
> out bcast pkts 96267 out bcast bytes 27724896
> pvc create time 9w3d, last time pvc status changed 7w4d
>
>
================================================================================
====
>
> Cormick#show interfaces
> Ethernet0 is up, line protocol is up
> Hardware is Lance, address is 0010.7b3a.3a4e (bia 0010.7b3a.3a4e)
> Internet address is 63.200.119.158/28
> MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 2/255
>
> Encapsulation ARPA, loopback not set, keepalive set (10 sec)
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 3/75, 210 drops
> 5 minute input rate 18000 bits/sec, 24 packets/sec
> 5 minute output rate 113000 bits/sec, 24 packets/sec
> 64042206 packets input, 881888058 bytes, 16 no buffer
> Received 365077 broadcasts, 0 runts, 0 giants, 210 throttles
> 13798 input errors, 0 CRC, 0 frame, 0 overrun, 13798 ignored, 0
> abort
> 0 input packets with dribble condition detected
> 73886303 packets output, 3838898715 bytes, 0 underruns
> 0 output errors, 46341 collisions, 430 interface resets
> 0 babbles, 0 late collision, 105851 deferred
> 0 lost carrier, 0 no carrier
> 0 output buffer failures, 0 output buffers swapped out
> Serial0 is up, line protocol is down
> Hardware is HD64570 with FT1 CSU/DSU
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
>
> Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10
> sec)
> LMI enq sent 578802, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
> Broadcast queue 0/64, broadcasts sent/dropped 4/0, interface
> broadcasts 2
> Last input never, output 00:00:04, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 5210 input errors, 52 CRC, 2 frame, 3 overrun, 320 ignored, 11
> abort
> 578805 packets output, 8105008 bytes, 0 underruns
> 0 output errors, 0 collisions, 192612 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 12 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
> Serial0.16 is down, line protocol is down
> Hardware is HD64570 with FT1 CSU/DSU
> Internet address is 216.224.128.66/30
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
>
> Encapsulation FRAME-RELAY IETF
> Serial1 is up, line protocol is up
> Hardware is HD64570 with FT1 CSU/DSU
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 2/255
>
> Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10
> sec)
> LMI enq sent 578763, LMI stat recvd 578758, LMI upd recvd 0, DTE LMI
> up
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
> Broadcast queue 0/64, broadcasts sent/dropped 96270/0, interface
> broadcasts 0
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters never
> Input queue: 2/75/29 (size/max/drops); Total output drops: 174
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/174 (size/max total/threshold/drops)
> Conversations 0/43/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> 5 minute input rate 114000 bits/sec, 23 packets/sec
> 5 minute output rate 15000 bits/sec, 23 packets/sec
> 73758553 packets input, 2998296891 bytes, 29 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 187 input errors, 17 CRC, 1 frame, 1 overrun, 10 ignored, 11 abort
> 64337229 packets output, 4222987732 bytes, 0 underruns
> 0 output errors, 0 collisions, 2 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 9 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
> Serial1.1 is up, line protocol is up
> Hardware is HD64570 with FT1 CSU/DSU
> Internet address is 208.184.205.242/30
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 2/255
>
> Encapsulation FRAME-RELAY IETF
>
>
================================================================================
====
>
> Cormick#show config
> Using 1534 out of 32762 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> service udp-small-servers
> service tcp-small-servers
> !
> hostname Cormick
> !
> boot system flash 1:c2500-is-l.120-10.bin
> boot system flash
> no logging console
> enable password 7 110A1016141D18
> !
> ip subnet-zero
> no ip domain-lookup
> clock timezone int 1
> !
> !
> !
> interface Ethernet0
> ip address 63.xxx.xxx.158 255.255.255.240
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> frame-relay lmi-type ansi
> !
> interface Serial0.16 point-to-point
> ip address 216.xxx.xx8.66 255.255.255.252
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> frame-relay interface-dlci 16
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no ip route-cache
> no ip mroute-cache
> service-module t1 timeslots 1-6
> frame-relay lmi-type ansi
> !
> interface Serial1.1 point-to-point
> ip address 208.x84.xxx.242 255.255.255.252
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> frame-relay interface-dlci 17 IETF
> !
> router rip
> version 2
> network 208.x84.205.0
> network 208.x85.205.0
> no auto-summary
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 208.x84.xxx.241
> ip route 0.0.0.0.0.0.0.0 216.224.xxx.65
> !
> line con 0
> exec-timeout 0 0
> password 7 094F471A1A0A04
> login
> transport input none
> line aux 0
> transport input all
> line vty 0 4
> password 7 104D000A061801
> login
> !
> end
>
>
> I would appreciate any help on this. Would I be using a frame relay
> map?? Thank you.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]