This is a configuration problem.
Situation: I have two ISP's involved. The router is a 2500 series.
Internal CSU/DSU.
On DLCI 17 ISP traffic routes. The other DLCI 16 doesn't. Information
is correct -
I must be missing something.
====================================================================================
Cormick#show frame-relay map
Serial0.16 (down): point-to-point dlci, dlci 16(0x10,0x400), broadcast
status deleted
Serial1.1 (up): point-to-point dlci, dlci 17(0x11,0x410), broadcast,
IETF
status defined, active
====================================================================================
Cormick#show frame-relay pvc
PVC Statistics for interface Serial0 (Frame Relay DTE)
DLCI = 16, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
Serial0.16
input pkts 0 output pkts 4 in bytes 0
out bytes 1794 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 4 out bcast bytes 1794
pvc create time 9w3d, last time pvc status changed 7w4d
PVC Statistics for interface Serial1 (Frame Relay DTE)
DLCI = 16, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial1
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0 Num Pkts
Switched 0
pvc create time 9w3d, last time pvc status changed 7w4d
DLCI = 17, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial1.1
input pkts 73176244 output pkts 63755322 in bytes 2986909822
out bytes 4214766293 dropped pkts 239 in FECN pkts 273970
in BECN pkts 254655 out FECN pkts 0 out BECN pkts 0
in DE pkts 940978 out DE pkts 0
out bcast pkts 96267 out bcast bytes 27724896
pvc create time 9w3d, last time pvc status changed 7w4d
====================================================================================
Cormick#show interfaces
Ethernet0 is up, line protocol is up
Hardware is Lance, address is 0010.7b3a.3a4e (bia 0010.7b3a.3a4e)
Internet address is 63.200.119.158/28
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 2/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 3/75, 210 drops
5 minute input rate 18000 bits/sec, 24 packets/sec
5 minute output rate 113000 bits/sec, 24 packets/sec
64042206 packets input, 881888058 bytes, 16 no buffer
Received 365077 broadcasts, 0 runts, 0 giants, 210 throttles
13798 input errors, 0 CRC, 0 frame, 0 overrun, 13798 ignored, 0
abort
0 input packets with dribble condition detected
73886303 packets output, 3838898715 bytes, 0 underruns
0 output errors, 46341 collisions, 430 interface resets
0 babbles, 0 late collision, 105851 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Serial0 is up, line protocol is down
Hardware is HD64570 with FT1 CSU/DSU
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10
sec)
LMI enq sent 578802, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 4/0, interface
broadcasts 2
Last input never, output 00:00:04, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
5210 input errors, 52 CRC, 2 frame, 3 overrun, 320 ignored, 11
abort
578805 packets output, 8105008 bytes, 0 underruns
0 output errors, 0 collisions, 192612 interface resets
0 output buffer failures, 0 output buffers swapped out
12 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial0.16 is down, line protocol is down
Hardware is HD64570 with FT1 CSU/DSU
Internet address is 216.224.128.66/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation FRAME-RELAY IETF
Serial1 is up, line protocol is up
Hardware is HD64570 with FT1 CSU/DSU
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 2/255
Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10
sec)
LMI enq sent 578763, LMI stat recvd 578758, LMI upd recvd 0, DTE LMI
up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 96270/0, interface
broadcasts 0
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 2/75/29 (size/max/drops); Total output drops: 174
Queueing strategy: weighted fair
Output queue: 0/1000/64/174 (size/max total/threshold/drops)
Conversations 0/43/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 114000 bits/sec, 23 packets/sec
5 minute output rate 15000 bits/sec, 23 packets/sec
73758553 packets input, 2998296891 bytes, 29 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
187 input errors, 17 CRC, 1 frame, 1 overrun, 10 ignored, 11 abort
64337229 packets output, 4222987732 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
9 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial1.1 is up, line protocol is up
Hardware is HD64570 with FT1 CSU/DSU
Internet address is 208.184.205.242/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 2/255
Encapsulation FRAME-RELAY IETF
====================================================================================
Cormick#show config
Using 1534 out of 32762 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname Cormick
!
boot system flash 1:c2500-is-l.120-10.bin
boot system flash
no logging console
enable password 7 110A1016141D18
!
ip subnet-zero
no ip domain-lookup
clock timezone int 1
!
!
!
interface Ethernet0
ip address 63.xxx.xxx.158 255.255.255.240
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay IETF
no ip route-cache
no ip mroute-cache
no fair-queue
frame-relay lmi-type ansi
!
interface Serial0.16 point-to-point
ip address 216.xxx.xx8.66 255.255.255.252
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 16
!
interface Serial1
no ip address
no ip directed-broadcast
encapsulation frame-relay IETF
no ip route-cache
no ip mroute-cache
service-module t1 timeslots 1-6
frame-relay lmi-type ansi
!
interface Serial1.1 point-to-point
ip address 208.x84.xxx.242 255.255.255.252
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 17 IETF
!
router rip
version 2
network 208.x84.205.0
network 208.x85.205.0
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 208.x84.xxx.241
ip route 0.0.0.0.0.0.0.0 216.224.xxx.65
!
line con 0
exec-timeout 0 0
password 7 094F471A1A0A04
login
transport input none
line aux 0
transport input all
line vty 0 4
password 7 104D000A061801
login
!
end
I would appreciate any help on this. Would I be using a frame relay
map?? Thank you.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]