Brian,
I actually had it bothways. I was trying to see what was happening when one of
our techs was trying to talk over ip to control a pabx.
Thanks for the prompt reply.
Rob.
"Murphy, Brian J SSI-ISET-31" wrote:
> I have seen this before with inbound access lists......dont know why it is
> port 0, i beleive outbound access lists give the port numbers....
>
> Brian
>
> -----Original Message-----
> From: Robert O'Brien [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, November 30, 2000 12:12 PM
> To: [EMAIL PROTECTED]
> Subject: Strange occurances in syslog
>
> Well I am stumped.
>
> The lines in the syslog from an "access-list 150 permit ip any any log"
> are not returning the port numbers, just a zero. This makes it very
> difficult to diagnose a traffic flow. This is being run on a 2500 series
> router with I think it was 12.07(T) IOS.
>
> Any suggestions or has any one seen this before??
>
> Our other routers (all types of chassis including 2500's) seem to be
> okay normally, but this is not definate.
>
> Rob O'Brien
> CCNA
> Canberra Australia
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
