Normal, no. Common, yes.
i.e Its quite common to see CPUHOG messages when performing online
insertion and removal on a router. Though in a perfect world this would
not be normal behavior.
All it means is that a process, in this case the Microcode Loader, has
taken up alot of CPU time (possibly hung) and the watchdog has terminated
the process to allow other processes to use the CPU. Most likely this
process was affected by the online insertion or removal (as you would
expect for a microcode loader) and as a result needs to be whipped back
inline.
The other two messages from RSP-3-SLAVECHANGE are normal.
Cheers
On 0, Abdul Mujeeb <[EMAIL PROTECTED]> wrote:
> Hi
>
> While doing the RSP failover test for cisco 7507 running on IOS version
> 12.0(13).
> i found this message
> What does this below output mean ,
>
>
> 19:%SYS-3-CPUHOG: Task ran for 2968 msec (53/44), process = Microc
> ode Loader, PC = 602A6368.
> -Traceback= 602A6370 602A6D64 602A43AC 60251804 602517F0
>
> Dec 2 21:41:21: %RSP-3-SLAVECHANGE: Slave changed state from Slave to
> Non-parti
> cipant
> Dec 2 21:41:22: %RSP-3-SLAVECHANGE: Slave changed state from
> Non-participant to
> Slave
>
>
>
>
> is it something normal
>
> Thanks in Advance.
>
> Regards,
> Abdul Mujeeb
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
[=====================================================[ www.cisco.com ]====]
James Wilson cisco Systems
Customer Service Engineer, I
Global On Site Services || ||
|| ||
Phone : +61-2-8448-7919 |||| ||||
Pager : +61-2-9430-6381 ..:||||||:..:||||||:..
[=========================[ USA +1-800-829-2447 ]=[ Aust 1800-121-531 ]====]
"I am convinced that life is 10% what happens to me and 90% how I react"
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]