At 12:01 PM +0200 12/4/00, Elias Aggelidis wrote:
>When you are using 802.1q
>DO NOT use the management VLAN (I mean VLAN 1)
>
>Vlan 1 on the ISL trunks is used only for management (as CISCO says)
>and Vlan 1 is the default Trunk Vlan on 802.1q.
>
>If you use VLAN 1 on the 802.1q you will find out that big packets (> 1482 )
>would not be processed correct !!
What I ended up doing, after some prompting from Brian, was to change the
native vlan to something other than 1, at which point vlan 1 trunking
works. I can put the management interface in any vlan I want on the 6k.
Ben
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
