You can also summarize the route
-Eddie
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Paul Schultz
Sent: Monday, December 04, 2000 6:31 PM
To: Elaluf, Sylvia,
Cc: [EMAIL PROTECTED]
Subject: Re: OSPF question
interface loopback 0
ip ospf network point-to-point
!
that'll make it push it out as a /24, not /32.
On Mon, 4 Dec 2000, Elaluf, Sylvia, wrote:
> Hello everybody
>
> I need some help with the following:
>
> Given the following
>
> loopback 0
> ip address 10.10.10.1 255.255.255.0
>
> router ospf 1
> network 10.0.0.0 0.0.0.255 area 0
>
> sh ip route 10.10.10.1
> known via connected loopback 0
> distributed via ospf 1
> 10.10.10.1 255.255.255.255
>
> what I want is to Advertise the loopback interface as class C and not
host
> specific route.
>
> distributed via ospf 1
> 10.10.10.1 255.255.255.0
>
> How do I do that?
>
> Silvia Elaluf-Calderwood
> [EMAIL PROTECTED]
>
> "Only two things are infinite, the universe and human stupidity, and I'm
not
> sure about the former."
> - Albert Einstein
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
