Hi, Cisco Fans, I have a question, could you have a look and if you could give me a reply, that will be much better. Following is: ******************************************************************** Subject: I want my LAN use Cisco2610__WIC-2A/S port to dial up to the Internet ******************************************************************** Enviroment: I have build 2 WindowsNT Servers. Server1: 200.200.201.2 255.255.255.0 Server2: 200.200.202.2 255.255.255.0 Router: ip address 200.200.202.1 255.255.255.0 ip address 200.200.201.1 255.255.255.0 secondary Router - Cisco 2610 have been installed a WIC-2A/S module, and I have a CAB-V35MT, one end is connected to the serial0/0 port on the WIC-2A/S module, the other end is a RS-232 adapter which is connected to a common 56K Modem. My ISP telephone number is 123 My Internet account is aaa My Internet password is bbb ********************************************************************* WHAT I WANT TO DO: I want to config the Router's serial0/0 port and I hope I could use the Router to dial up to the internet and All users in my Lan could use Internet recourse. ************************************************************************ Thank you for reading this message and I hope you could give me a config example, a direction, I will appreciate for it. By the way, if what I have expected is not reasonable, Please give me a solution. But the equipment should be AUX port, 56K Modem etc.(No ISDN, No Frame Relay...) Thank you very much, I really hope you could give me a reply, it is the 4th day I asked the question in my country, but no body answer my question. [EMAIL PROTECTED] [EMAIL PROTECTED] Best regards. Hanson Hong. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]