you connect them however you need to for a given scenerio. A lab doesn't
have to be setup in fixed configuration, so you could use the crossover
serial between say the 2501 and 2503, and again between the 2503 and
2504.........then you could plug both 2501 an 2503 into a hub, and then
with 2 nt1's you can connect the 2503 ane 2504 together via isdn
backup...........
brian
On Thu, 7 Dec 2000, Brian Dellong wrote:
> hi brian,
>
> can you please let us know as to how you connected
> your 3 routers ? i see that all your routers have
> atleast 2 serial connections. I am sure you did not
> have Fram Relay for your serial connections...
>
> then how are you connecting the 3 routers ?
> it would be beneficial to all in this list...
>
> thanks
> brian
>
> --- Brian <[EMAIL PROTECTED]> wrote:
> >
> > I am selling my first cisco lab.
> >
> > 2501 16dram/8flash
> > 2503 16dram/8flash
> > 2504 16dram/8flash
> > 2 crossover serial cables
> > 2 tranceivers
> >
> > $2800.00
> >
> >
> > -----------------------------------------------
> > Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
-----------------------------------------------
Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
