Hi there,
Just do the following:
multilink virtual-template 1
interface virtual-template 1
encapsulation ppp
ppp multilink
... assign serial link IP address (eg. ip address 192.168.255.249
255.255.255.252)
interface serial0
no ip address
encapsulation ppp
ppp multilink
interface serial1
no ip address
encapsulation ppp
ppp multilink
This will bind the two physical serial connections into a single "virtual
access" interface and enable Multilink PPP.
Paul
"Network Operations" wrote in message <90t36m$ug$[EMAIL PROTECTED]>...
>I want to multilink 2nos 64Kbps Leased Lines ( to aggregate 128Kbps) both
>links connected on same cisco routers on either side (Model of Cisco router
>is different on both sides) . pls let me know how this configuration can be
>done & also if any particular IOS version is reqd. Is this function limited
>to any model of cisco router or it is possible on any model.
>
>Thanks in advance
>Akshay
>
>
>
>
>_________________________________
>FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
