Hi,
I have used almost the similar configuration to configure my Cisco AS5300 for
Multilink. It was successful but I have observed that the speed through Multilink is
slower than the single link. What could be reason.
I am using AS5300 with 4 PRIs.
Thanks
Aftab Rashid
Paul Lalonde wrote:
> Hi there,
>
> Just do the following:
>
> multilink virtual-template 1
>
> interface virtual-template 1
> encapsulation ppp
> ppp multilink
> ... assign serial link IP address (eg. ip address 192.168.255.249
> 255.255.255.252)
>
> interface serial0
> no ip address
> encapsulation ppp
> ppp multilink
>
> interface serial1
> no ip address
> encapsulation ppp
> ppp multilink
>
> This will bind the two physical serial connections into a single "virtual
> access" interface and enable Multilink PPP.
>
> Paul
>
> "Network Operations" wrote in message <90t36m$ug$[EMAIL PROTECTED]>...
> >I want to multilink 2nos 64Kbps Leased Lines ( to aggregate 128Kbps) both
> >links connected on same cisco routers on either side (Model of Cisco router
> >is different on both sides) . pls let me know how this configuration can be
> >done & also if any particular IOS version is reqd. Is this function limited
> >to any model of cisco router or it is possible on any model.
> >
> >Thanks in advance
> >Akshay
> >
> >
> >
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
