My router keep on trying six times to use netboot despite the fact that bit
13 is set. Cisco says "...the router will retry the netboot commands up to
six times unless the boot default ROM software if netboot fails bit (bit 13
of the virtual configuration register) is set. If bit 13 is set, the system
boots the boot help image found in boot Flash memory without any retries"
THIS IS WHAT I HAVE:
Bit# Configuration register option settings:
15 Diagnostic mode disabled
14 IP broadcasts do not have network numbers
13 Boot default ROM software if network boot fails
12-11 Console speed is 9600 baud
10 IP broadcasts with ones
08 Break disabled
07 OEM disabled
06 Ignore configuration disabled
03-00 Boot file is cisco2-4000 (or 'boot system' command)
Thank you
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]