Dear Anne,
You can deduct from the output:
Bit 14 is not set because Diagnostic mode is disabled
Bit 15 is not set because IP broadcasts do not have network
Bit 13 is set because the router will Boot default ROM software if network
boot fails
so the config-register starts with 0x2
Bit 12 and 11 must be set to zero because console speed is 9600.
Bit 10 is not set because we are broadcasting with one
Bit 08 has break disabled so it is set
so the config-register continues with 0x21
Bit 06 has Ignore configuration disabled (default) so bit is not set
so the config-register continues with 0x210
Bit 00-03 is set so that it is either boot system or the default cisco2-4000
therefore the config is 0x2102
Pierre
-----Original Message-----
From: Leigh Anne Chisholm [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 13, 2000 9:17 AM
To: Pierre-Alex
Subject: RE: Configuration Register and Netboot Failure
Out of curiosity, what is the config register value you have set?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Pierre-Alex
Sent: December 13, 2000 4:35 AM
To: Cisco
Subject: Configuration Register and Netboot Failure
My router keep on trying six times to use netboot despite the fact that bit
13 is set. Cisco says "...the router will retry the netboot commands up to
six times unless the boot default ROM software if netboot fails bit (bit 13
of the virtual configuration register) is set. If bit 13 is set, the system
boots the boot help image found in boot Flash memory without any retries"
THIS IS WHAT I HAVE:
Bit# Configuration register option settings:
15 Diagnostic mode disabled
14 IP broadcasts do not have network numbers
13 Boot default ROM software if network boot fails
12-11 Console speed is 9600 baud
10 IP broadcasts with ones
08 Break disabled
07 OEM disabled
06 Ignore configuration disabled
03-00 Boot file is cisco2-4000 (or 'boot system' command)
Thank you
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
