Hi all,
I'm trying to configure a 2501. There's nothing in the flash. I configured
the E0 with an IP and connected it to a laptop. I'm trying to upload the IOS
but the interface keeps going up and down :
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
dow
The prompt I'm at is : Lab_D(boot)#
Any ideas ?
Thanks,
Bharat
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
