Hi Hans,
I do not know what E1 module you have, but if you follow the link below, you
can see that the E1 module they're talking about there needs IOS version
12.0(5)T or later.
http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/mduls_ds.htm
(watch for word wrap)
You can get a lot of info from just typing in a search on
http://www.cisco.com
I got this info typing in "3600 e1" (without the "'s).
hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Schimek, Hans [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 19, 2000 4:38 AM
To: Cisco (E-mail)
Subject: 3640 not compatible with E1 interfaces ?????
Hi!
i tried to install a 3640 with E1 interfaces (RJ48) - but
seemingly this router isn`t compatible with these
interfaces- i tried several IOSs - only IOS 12.07 XK1
detects these interfaces -
but after configuring the interfaces - nothing happens.
the whole configuration works fine on a c2600 with E1 interfaces.
any idea.
thanx in advance
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
