I think you may wish to reverse the order of your access list by permitting
traffic first and then denying everything else..dj
"Edward Gomez" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everybody,
>
> I am having an issue with the following access list. I am trying to put an
> ACL on my frame router that can limit which network inside my company a
> partner
> can access. I basically want any traffic coming from 192.168.50.0 to be
able
> to go to 192.168.5.0. When I apply the access list nothing gets through.
> If I ping a remote address I get a TTL expired in transit. I am running
> EIGRP between the routers. Do I need to have an access list that allows
> access to the LAN side for EIGRP updates? or is this done via the WAN
port?
> What am I doing wrong here??
>
>
> ip access-list extended FrameInbound
> deny ip host 0.0.0.0 any
> permit ip 192.168.50.0 0.0.0.255 192.168.5.0 0.0.0.255
>
> I have also tried: permit ip 192.168.50.0 0.0.0.255 host 192.168.5.0 and
> that did not work either.
>
> Thanks in advance!!!
>
> Eddie
> ----------
> Edward J. Gomez, MCSE, CNE, CCNA
> Information Systems Manager
> ProxyMed, Inc
> 2555 Davie Road,
> Suite 110
> Fort Lauderdale, Florida 33317
> (954) 473-1001 x315
> http://www.proxymed.com
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
