Please take a look at "auto-negotiation" feature of all the switches. Try to
turn this feature off and manually set the interconnected ports as 10-half,
10-full, 100-half and 100-full.
Hope this helps.
""Pradeep Kumar"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Folks,
>
>
> 1. I have 3 cases where a Cisco Cat 2912,2914 switch is crashing other
Layer 4-7 capable switch.
>
> 2. On testing with a Sniffer, I noted a large number of Ethernet
collisions.
>
> Any inputs - why ?
>
> the problem dissapears when I remove the Cat 2900 series.
>
> Thanks for responses.
>
> Pradeep
>
>
>
___________________________________________________________________________
> Visit http://www.visto.com/info, your free web-based communications
center.
> Visto.com. Life on the Dot.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
