SEE attached Figure
Consider the above OSPF network. You have configured a virtual path to co=
nnect
Area 3 with Area 0. What is your assessment of this network? =
1.The network will work. However, you must configure a second virtual li=
nk
through router B to ensure there are no routing loops. =
2.The network will not work. Area 3 must be directly connected to Area 0.=
=
3. The network will work properly with no redundant hops. =
4. network will work. However, it contains sub-optimal routing as packets=
from
router D to router C must transit router A =
5. network will not work. A routing loop exists as packets destined for r=
outer
C from router D must pass through router C twice.
=
=
=
=
Thanks in advance.
Regards
MK
=
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=3D=
1
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
