What attached figure????? Forget something??
Mark Zabludovsky ~ CCNA, CCDA, 1/2-NP
<A HREF="mailto: [EMAIL PROTECTED]">[EMAIL PROTECTED]</A>
"Even if I knew I had only 1 more week to live, I would still schedule
my CCIE lab. I would just have to work a little harder I guess. After all,
without any goals in life, I'm dead already."
~Mark Zabludovsky~
In a message dated 12/26/00 3:17:25 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
> SEE attached Figure
>
> Consider the above OSPF network. You have configured a virtual path to co=
> nnect
> Area 3 with Area 0. What is your assessment of this network? =
>
>
> 1.The network will work. However, you must configure a second virtual li=
> nk
> through router B to ensure there are no routing loops. =
>
>
> 2.The network will not work. Area 3 must be directly connected to Area 0.=
> =
>
>
> 3. The network will work properly with no redundant hops. =
>
>
> 4. network will work. However, it contains sub-optimal routing as packets=
> from
> router D to router C must transit router A =
>
>
> 5. network will not work. A routing loop exists as packets destined for r=
> outer
> C from router D must pass through router C twice.
> =
>
> =
>
> =
>
> =
>
> Thanks in advance.
> Regards
> MK
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
