It depends on how you configure it. If you use Legacy DDR it will be locked
into use as a backup only. If you configure with a DIALER interface, then
it is used on a first-come, first-served basis.
Kelly D Griffin, CCNA
Network Engineer
Kg2 Network Design
http://www.kg2.com
----- Original Message -----
From: "Groupstudy" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 27, 2000 12:21 PM
Subject: Interface backup
> Once you make a BRI interface a backup to say a serial interface, does =
> it lock it down so that it is not useable for any other purposes?
>
> eg:
> interface serial 0
> backup load 60 5
> backup interface bri 0
>
> Cheers.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
____________________________________________
http://1cis.com
Free E-mail Servers with unlimited mailboxes
1st Class Internet Solutions
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
