Take a look at this if you haven't already.....looks like init_flash didn't
run properly:
http://www.cisco.com/warp/public/473/36.shtml
""Kevin Hunt"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I just bought a 2924XL-A off ebay and the password recovery method
> listed on cisco's site doesn't work. I hold down the mode key, boot up
> the switch, get the switch: prompt, type in init_flash, then
> load_helper, then when I do a dir flash I get this message
> "unable to stat flash/: permission denied"
>
> Any ideas?
> --
> Kevin Hunt
> CCNA, MCSE, MCT
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
