There are a couple of things this could be:
1: config-register on router (most likely)
2: Hyperterminal settings on PC (probably not if you tried multiple PC's)
It is probably the config-register on the router. Search CCO for 1700
password recovery and use the techniques to change your config-register back
to its default which is probably 0x2102.
Check the settings on your PC terminal emulator. They should be set to 8
bits, no parity, 1 stop bit and 9600 baud.
----- Original Message -----
From: Hitesh Pathak <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, January 01, 2001 3:31 AM
Subject: Router 1700 showing Junk
> Dear All,
>
> I'm having a problem with my 1700 series router. The problem is whenever I
> start my router it shows continously junk characters on the console.
> Nothing seems to be working. i have tried changing diff PC as well as
> console cable. Also I have checked for terminal settings like Baud rate ,
> stop bits , Flow control etc....everything is perfect. I am using windows
> 98 as a terminal (Hyper Terminal).
>
> Can anyone help me on this?????can it be a DRAM corruption problem. Router
> has 8 mb of DRAM.
>
> many thanks in advance.
>
>
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
