it is my understanding that a GRE tunnel is required for passing multicast traffic over
a VPN link... however I won't even attempt to forge a working config here- you're
better
off checking CCO for that.
GWA
Nabil Fares wrote:
> Greetings,
>
> I can't seem to find any information about PIX passing OSPF traffic between
> routers. I'm trying to install a PIX515 between 2 regional routers.
>
> Router-C1----------PIX515-----------Router-C2
>
> Cisco recommends using the OSPF neighbor command, anyone out there used this
> configuration before? Any information would be helpful.
>
> Thanks,
>
> Nabil
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]