You can always check:
http://www.cisco.com/warp/public/471/top_issues/vpn/vpn_index.shtml
There is a very large ( 2 meg plus ) document on CCO called ipsc_dg.pdf
IPSec Design guide. You get to it through the www.cisco.com/tac link, but it
can be a bit indirect, and the actual link to the document off the tac page
is broken. I haven't tried in a while to download this document. You may
need a CCO login to do so. Over 300 pages and tons of configuration
examples.
HTH
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
gwakin
Sent: Tuesday, January 02, 2001 9:19 AM
To: [EMAIL PROTECTED]
Subject: Re: PIX and OSPF help! (Revisited)
it is my understanding that a GRE tunnel is required for passing multicast
traffic over
a VPN link... however I won't even attempt to forge a working config here-
you're better
off checking CCO for that.
GWA
Nabil Fares wrote:
> Greetings,
>
> I can't seem to find any information about PIX passing OSPF traffic
between
> routers. I'm trying to install a PIX515 between 2 regional routers.
>
> Router-C1----------PIX515-----------Router-C2
>
> Cisco recommends using the OSPF neighbor command, anyone out there used
this
> configuration before? Any information would be helpful.
>
> Thanks,
>
> Nabil
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
