Kevin, Thx. No sooner did I go to lunch and was halfway through my burger
when I relaized I forgot to add the network statements in the ip routing
protocol. Boy, sometimes you can't see the forest for the trees.
""Kevin Wigle"" <[EMAIL PROTECTED]> wrote in message
012001c07673$9dbd0120$[EMAIL PROTECTED]">news:012001c07673$9dbd0120$[EMAIL PROTECTED]...
> To better understand, we would need to see the other loop address that
does
> work
>
> and
>
> then the network statements of the IGP you're using.
>
> But, on the remote router if you issue the command "sh ip route
> xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx"
>
> does the route show up?
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "James Haynes" <[EMAIL PROTECTED]>
> Newsgroups: groupstudy.cisco
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, January 04, 2001 11:51 AM
> Subject: Loopback addresses
>
>
> > I've been adding loopback addresses to a few routers in the WAN for a
> > TACACS+ server to connect to. I can ping the loopback addresses on the
> > routers individually, but not from remote routers. There are routers on
> the
> > network with previously configured loopback addresses for dlsw+ that I
can
> > ping by loopback address from remote routers. Am I forgetting something?
I
> > configured as:
> >
> > router# config t
> > router(config)# int loop 0
> > router(config-if)# ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
> >
> > I can see the loopback addresses in the run configs. Thx for any
> > suggestions.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
