Hi Tim,
FYI....
Maybe you already know this, but anytime you make a change to the
syslog.conf file. You will need to restart or HUP the syslog daemon.
Also...I have seen Cisco documentation that you need 5 tabs between
local0.debug (5 Tabs) /var/log/cisco.log (not being a NMS guru - that
may or may not be true )
-Brian
At 12:14 PM 01/05/2001 -0600, Tim Lovelace wrote:
>I just setup syslog this week on routers running 12.0(5)T1 and havent had a
>problem for my routers I have
>
>logging facility local0
>logging 199.191.104.9
>logging trap 7
>
>then on the syslog box I setup I added this to syslog.conf
>
>local0.debug /var/log/cisco.log
>
>works perfectly for me
>
>Hope that helps
>Tim
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>Timothy Metz
>Sent: Friday, January 05, 2001 11:28 AM
>To: [EMAIL PROTECTED]
>Subject: Syslog Problem
>
>
>Hi All,
>
>Ever since I upgraded to 12.X I have been unable to get them logging again
>to the syslog daemon on my server. Other things are logging fine so I know
>theres no problem with it. It did work fine with 11.X, I've searched CCO and
>can't find anything I didn't already know. One router is a 2501, the other a
>2505. Here's one of the config's, I'd appreciate any help you all could
>offer.
>
>Thanks
>
>Tim
>
>
>Building configuration...
>
>Current configuration : 2190 bytes
>!
>! Last configuration change at 18:15:32 CET Fri Jan 5 2001
>!
>version 12.1
>service timestamps debug datetime msec localtime show-timezone
>service timestamps log datetime msec localtime show-timezone
>service password-encryption
>!
>hostname Access2505
>!
>boot system flash
>logging buffered 10000 debugging
>no logging console
>enable secret 5 xxxxxxxxxxxxxxxxxxxx
>enable password 7 xxxxxxxxxxxxxxxxxxx
>!
>!
>!
>!
>!
>clock timezone CET 1
>ip subnet-zero
>no ip finger
>ip name-server 212.185.252.73
>ip name-server 194.25.2.129
>!
>ip multicast-routing
>frame-relay switching
>cns event-service server
>!
>!
>!
># irrevelent hub ether stuff removed
>!
>!
>interface Ethernet0
> ip address 192.168.0.252 255.255.255.0
> ip pim sparse-dense-mode
> ip multicast ttl-threshold 16
> no ip route-cache
> no ip mroute-cache
>!
>interface Serial0
> bandwidth 4000
> ip address 192.168.10.252 255.255.255.0
> ip pim sparse-dense-mode
> ip multicast ttl-threshold 16
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> fair-queue
> clockrate 4000000
> cdp enable
> frame-relay interface-dlci 192
> frame-relay intf-type dce
>!
>interface Serial1
> no ip address
> no ip route-cache
> no ip mroute-cache
> shutdown
>!
>router rip
> version 2
> network 192.168.0.0
> network 192.168.10.0
>!
>ip classless
>no ip http server
>ip pim rp-address 192.168.20.253
>ip pim send-rp-announce Ethernet0 scope 16
>ip pim send-rp-announce Serial0 scope 16
>ip pim send-rp-discovery Serial0 scope 16
>!
>logging facility syslog
>logging 192.168.0.2
>access-list 5 deny 192.168.0.3
>access-list 5 permit any
>!
>snmp-server community xxxxxx RO
>snmp-server community xxxxxxxx RW
>!
>line con 0
> exec-timeout 5 0
> password 7 xxxxxxxxxxxxx
> logging synchronous
> login
> transport input none
>line aux 0
> transport input all
>line vty 0 4
> exec-timeout 5 0
> password 7 xxxxxxxxxxxxxxxxxx
> logging synchronous
> login
>!
>ntp clock-period 17179719
>ntp server 192.43.244.18
>end
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Brian E. Howard
NSA Consulting Engineer
NSA - Network Supported Accounts
Voice: (919) 392-7615
Pager: 1-800-365-4578
e-mail: [EMAIL PROTECTED]
e-page: [EMAIL PROTECTED]
C i s c o S y s t e m s
Research Triangle Park, NC
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
