Addresses are only summarized at network boundaries, for instance if your router has
one interface in the 10.0.0/24 subnet and another interface in the 192.168.0/24 subnet
then routing updates sent to the 192.168.0 interface will have a summarized 10/8 entry
for the first network. If your entire network is using the same network address and
subnet then it will never be summarized.
---------- Original Message ----------------------------------
From: "Bruce Williams" <[EMAIL PROTECTED]>
Reply-To: "Bruce Williams" <[EMAIL PROTECTED]>
Date: Fri, 5 Jan 2001 14:50:24 -0500
>>From what I read, EIGRP will summarize at classful boundaries. I have a
>10.0.0.0 network subnetted with a mask of 255.255.255.0. I am using over 20
>subnets and even without the "no auto-summary" command I still am able to
>see these subnets in the routing table of all routers. Why?
>
>Bruce Williams
>[EMAIL PROTECTED]
>
>
>
>_________________________________
>FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
