HSRP is Cisco proprietary.
There is an open standard called VRRP virtual redundant routing protocol
published in RFC 2338
Actually I see that Cisco published the HSRP as RFC 2281, but as
informational, and not as a proposed standard.
I know that Nokia, for one, runs VRRP on their hardware platforms.
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
eric^_^
Sent: Saturday, January 06, 2001 7:55 PM
To: [EMAIL PROTECTED]
Subject: Re: HSRP Groups
Hi :
I can't use the HSRP in Bay switch . It will active in both route.
So, Now this connect in the HUB only. Any problem in Bay switch ?
Ken Vandenbark wrote:
> Is there an advantage to having more than one HSRP group assigned to an
> interface?
> I don't see an advantage one maybe someone has experienced advantages =
> in
> having multiple HSRP groups. Example of config:
> Router 1
> =20
> router1#sh run=20
> Building configuration...
> =20
> Current configuration:
> !
> version 12.0
> service timestamps debug datetime msec localtime show-timezone
> service timestamps log datetime msec localtime show-timezone
> =20
> service password-encryption
> !
> hostname router1
> !
> logging buffered 16384 debugging
> no logging console
> !
> username xxx privilege 15 password 7 xxxxxxx
> username xxx privilege 15 password 7 xxxxxxx
> !
> !
> !
> !
> clock timezone cst -6
> clock summer-time cdt recurring
> ip subnet-zero
> no ip finger
> ! =20
> no ip bootp server
> !
> !
> !
> interface FastEthernet0/0
> ip address 10.10.192.215 255.255.255.240
> no ip redirects
> no ip directed-broadcast
> speed 100
> full-duplex
> standby 3 timers 5 15
> standby 3 priority 250 preempt
> standby 3 authentication guess
> standby 3 ip 10.10.192.213
> standby 3 track FastEthernet0/1 100
> standby 4 timers 5 15
> standby 4 priority 200 preempt
> standby 4 authentication guess
> standby 4 ip 10.10.192.214
> standby 4 track FastEthernet0/1 100
> !
> interface FastEthernet0/1
> ip address 10.10.192.226 255.255.255.248
> no ip redirects
> no ip directed-broadcast
> duplex full
> speed 100
> standby timers 5 15
> standby priority 250 preempt
> standby authentication related
> standby ip 10.10.192.225
> standby track FastEthernet0/0 100
> standby 1 timer 5 15
> standby 1 priority 200 preempt
> standby 1 authentication guess
> standby 1 ip 10.10.192.228
> standby 1 track FastEthernet0/0 100
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.10.192.209
> ip route 0.0.0.0 0.0.0.0 10.10.192.210
> ip route 10.10.192.240 255.255.255.240 10.10.192.230
> ip route 10.10.192.240 255.255.255.240 10.10.192.229
> ip route 10.10.194.0 255.255.255.224 10.10.192.230
> ip route 10.10.194.0 255.255.255.224 10.10.192.229
> no ip http server
> !
> access-list 1 deny any
> access-list 10 permit 10.10.192.216
> access-list 10 permit xx.xx.xx.xx
> !
> Router 2
> =20
> router2#sh run=20
> Building configuration...
> =20
> Current configuration:
> !
> version 12.0
> service timestamps debug datetime msec localtime show-timezone
> service timestamps log datetime msec localtime show-timezone
> service password-encryption
> !
> hostname router2
> !
> logging buffered 16384 debugging
> no logging console
> !
> username xxx privilege 15 password 7 xxxxxxx
> username xxx privilege 15 password 7 xxxxxxx
> !
> !
> !
> !
> clock timezone cst -6
> clock summer-time cdt recurring
> ip subnet-zero
> no ip finger
> ! =20
> no ip bootp server
> !
> !
> !
> interface FastEthernet0/0
> description Exodus Facing
> ip address 10.10.192.216 255.255.255.240
> no ip redirects
> no ip directed-broadcast
> speed 100
> full-duplex
> standby 3 timers 5 15
> standby 3 priority 200 preempt
> standby 3 authentication payroll
> standby 3 ip 10.10.192.213
> standby 3 track FastEthernet0/1 100
> standby 4 timers 5 15
> standby 4 priority 250 preempt
> standby 4 authentication payroll
> standby 4 ip 10.10.192.214
> standby 4 track FastEthernet0/1 100
> !
> interface FastEthernet0/1
> description Customer Facing
> ip address 10.10.192.227 255.255.255.240
> no ip redirects
> no ip directed-broadcast
> duplex full
> speed 100
> standby timers 5 15
> standby priority 200 preempt
> standby authentication related
> standby ip 10.10.192.225
> standby track FastEthernet0/0 100
> standby 1 timer 5 15
> standby 1 priority 250 preempt
> standby 1 authentication related
> standby 1 ip 10.10.192.228
> standby 1 track FastEthernet0/0 100
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.10.192.209
> ip route 0.0.0.0 0.0.0.0 10.10.192.210
> ip route 10.10.192.240 255.255.255.240 10.10.192.230
> ip route 10.10.192.240 255.255.255.240 10.10.192.229
> ip route 10.10.194.0 255.255.255.224 10.10.192.230
> ip route 10.10.194.0 255.255.255.224 10.10.192.229
> no ip http server
> !
> access-list 1 deny any
> access-list 10 permit 10.10.192.217
> access-list 10 permit xx.xx.xx.xx
> !
>
> Thanks in Advance
> Ken
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
