Thank you for a possible solution. When I try the command I get the
following error:
Erasure of partition 2 required
I am not sure what I am supposed to do?
TIA
Mark
----- Original Message -----
From: Circusnuts <[EMAIL PROTECTED]>
To: Mark Rose <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, January 06, 2001 5:17 PM
Subject: Re: Flash Memory
> partition flash & no partion flash are the commands...
>
> Phil
>
> ----- Original Message -----
> From: "Mark Rose" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, January 06, 2001 10:57 PM
> Subject: Flash Memory
>
>
> > Recently posted was the command to create one memory block in flash
after
> > adding a second memory stick. I can't seem to find it in the archives.
It
> > combines the read-only & read & write into a 16 meg partition. Could
> > someone help me out, I am having trouble locating the command.
> >
> > TIA
> > Mark
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
