The "1" in the last nibble there indicates that you are booting to rommon
e.g.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2524/
boa/boamnt.htm#xtocid1109016
watch the word wrap.
You will need to perform the "password recovery" procedure, and change the
config register to 0x2102
If you are actually in the prompt rommon> you can easily issue the "o/r
0x2102" command, then the "I" command to reinitialize. Assuming you have an
IOS in flash, your router would then come up normally.
HTH
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
zuszus
Sent: Monday, January 08, 2001 12:50 PM
To: [EMAIL PROTECTED]
Subject: configuration register
i am a network administrator of CORVIT SYSTEMS PRIVATE LIMITED PAKISTAN.I
JUST CHANGED TJE CONFIGURATION REGISTOR VALUE to 0x2101 OF MY cisco routers
( cpa 2501),and reloaded. after that they are not get started.i erased the
flash and reloaded from tftp , but all my efforts ended in in vain. please
help.
khawaja usman mahmood
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]