It is my understanding that the RSFC supports the full Cisco router IOS, and therefore, supports route-maps the same. The only difference being that the RSFC uses the "interface vlan." Other than that, just the "ip policy route-map map-tag", "route-map map-tag [permit | deny] [sequence-number]", match statements, and set statements, then I think it would work just fine. hth, Evan -----Original Message----- From: Kent Hawkins [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 09, 2001 2:21 PM To: [EMAIL PROTECTED] Subject: RSFC Does anyone have the config for setting up policy routing on an RSFC, need to divert port 80 traffic into another VLAN without having escape out the default gateway....................? _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
