Please add corections as you see necessary, as I am doing this from the top of my head... Given a VLAN with users on subnet 10.10.100.0/24: interface vlan100 ip policy route-map web-traffic route-map web-traffic permit 10 match ip address 101 set ip default next-hop (insert address(es) here) access-list 101 permit tcp 10.10.100.0 0.0.0.255 any eq 80 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Evan Francen Sent: Tuesday, January 09, 2001 4:46 PM To: 'Kent Hawkins'; [EMAIL PROTECTED] Subject: RE: RSFC It is my understanding that the RSFC supports the full Cisco router IOS, and therefore, supports route-maps the same. The only difference being that the RSFC uses the "interface vlan." Other than that, just the "ip policy route-map map-tag", "route-map map-tag [permit | deny] [sequence-number]", match statements, and set statements, then I think it would work just fine. hth, Evan -----Original Message----- From: Kent Hawkins [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 09, 2001 2:21 PM To: [EMAIL PROTECTED] Subject: RSFC Does anyone have the config for setting up policy routing on an RSFC, need to divert port 80 traffic into another VLAN without having escape out the default gateway....................? _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
