Have you changed the FLASH or boot ROM's lately. This smells of a bad
upgrade :-)
Phil
----- Original Message -----
From: "ElephantChild" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, January 10, 2001 7:51 PM
Subject: Re: emty flash on 2500
> On Tue, 9 Jan 2001 [EMAIL PROTECTED] wrote:
>
> > Hi,
> >
> > I have trouble of copying an IOS image onto the flash memory on my
> > Cisco 2500 router from a TFTP server, it keeps telling me 'Device in
> > READ-ONLY state'. I have tried to set the config-register to 0x2101
> > but it still saying the same thing. Can someone advise me on this
> > please?
> >
> > System flash directory:
> > No files in System flash
> > [0 bytes used, 8388608 available, 8388608 total]
> > 8192K bytes of System flash (Device not programmable)
> >
> > Router#copy tftp flash
> > ERR: Device in READ-ONLY state
>
> Some models have a jumper that prevents you from writing to flash EPROM,
> even when not running IOS from flash. See your router's hardware manual.
>
> --
> "Airplane travel is nature's way of making you look like your passport
> photo." --- Al Gore
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
