no.... it's a new router, I think I will check my manual and jumpers :)
Circusnuts wrote:
> Have you changed the FLASH or boot ROM's lately. This smells of a bad
> upgrade :-)
>
> Phil
>
> ----- Original Message -----
> From: "ElephantChild" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Wednesday, January 10, 2001 7:51 PM
> Subject: Re: emty flash on 2500
>
> > On Tue, 9 Jan 2001 [EMAIL PROTECTED] wrote:
> >
> > > Hi,
> > >
> > > I have trouble of copying an IOS image onto the flash memory on my
> > > Cisco 2500 router from a TFTP server, it keeps telling me 'Device in
> > > READ-ONLY state'. I have tried to set the config-register to 0x2101
> > > but it still saying the same thing. Can someone advise me on this
> > > please?
> > >
> > > System flash directory:
> > > No files in System flash
> > > [0 bytes used, 8388608 available, 8388608 total]
> > > 8192K bytes of System flash (Device not programmable)
> > >
> > > Router#copy tftp flash
> > > ERR: Device in READ-ONLY state
> >
> > Some models have a jumper that prevents you from writing to flash EPROM,
> > even when not running IOS from flash. See your router's hardware manual.
> >
> > --
> > "Airplane travel is nature's way of making you look like your passport
> > photo." --- Al Gore
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
