Hello,
I see that your configuration right but there is still left something. I
think you should add one route-map command to handle the others route to
pass with no change. You add like below:
route-map commun-out permit 20
Why we must this command?, because when we using route-map for policy
routing, the route that do not match the route-map statement will be
discarded.
I hope that help, correct me if i am wrong!
william
----- Original Message -----
From: root <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 10, 2001 2:39 PM
Subject: communities
> Hello,
>
> when I set up a community using the no-export keyword. When I use this
> keyword AS1 is telling AS2 I'm giving you the 10.10.20.0 route, but
> don't pass it to AS3. Is this correct? In short it's not for the
> immediate neighbor, it's so that neighbor doesn't pass it to anyone
> else?
>
>
>
> 10.10.20.0 AS1--------------AS2--------------------AS3
> 10.10.30.0 10.10.10.0
> 10.10.10.0 Do not export 10.10.20.0
> to AS3
>
> router bgp 1
> neighbor 10.10.10.2 remote-as 2
> neighbor 10.10.10.2 send-community
> neighbor 10.10.10.2 route-map commun-out out
>
> access-list 1 permit 10.10.20.0 0.0.0.255
>
> route-map commun-out permit 10
> match ip address 1
> set community no-export
>
> Thank You,
> Andre
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
