Jerry, On your authentication pap chap line... put the word callin after it. That might help. Cory -----Original Message----- From: Jerry Deer [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 11, 2001 2:01 PM To: Jerry Deer; '[EMAIL PROTECTED]' Subject: no remote authentication for call out? trouble shoot this for some reason the last message didnt make it so: below is the debug message i get when trying to connect to SWBs internet with cisco 2503 router using isdn. The connection stays up for a few seconds then drops , this has SWB tech perplexed ... does anyone here have any ideas as to what this might indicate ??? Thank you, Jerry ... 00:31:54: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up. 00:31:54: BR0:1 PPP: Treating connection as a callout 00:31:54: BR0:1 PPP: Phase is ESTABLISHING, Active Open 00:31:54: BR0:1 PPP: No remote authentication for call-out any help would be appreciated! -----Original Message----- From: Jerry Deer [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 11, 2001 11:15 AM To: '[EMAIL PROTECTED]' Subject: no remote authentication for call out? trouble shoot this _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]