How about sending the config for the 2503 to the list. although i don't have any experience with ddr and isdn stuff, if i had to guess, i would say there appears to be a chap conflict with your isp.... brent On 11/01/01 14:01 -0600, Jerry Deer wrote: >for some reason the last message didnt make it so: > > >below is the debug message i get when trying to connect to SWBs internet >with cisco 2503 router using isdn. The connection stays up for a few seconds >then drops , this has SWB tech perplexed ... does anyone here have any ideas >as to what this might indicate ??? >Thank you, >Jerry >... >00:31:54: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up. >00:31:54: BR0:1 PPP: Treating connection as a callout >00:31:54: BR0:1 PPP: Phase is ESTABLISHING, Active Open >00:31:54: BR0:1 PPP: No remote authentication for call-out > >any help would be appreciated! > > > > >-----Original Message----- >From: Jerry Deer [mailto:[EMAIL PROTECTED]] >Sent: Thursday, January 11, 2001 11:15 AM >To: '[EMAIL PROTECTED]' >Subject: no remote authentication for call out? trouble shoot this > > >_________________________________ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_________________________________ >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
