Here are some links for the CSS switches. For the application that it
appears that you are trying to run you will need the switches in front and
behind the PIX boxes. The PIX 535 is out now and will do a Gig of
throughput. What are you trying to accomplish? You can run PIXes in a
active/passive config if it is high availability that you are looking for.
Give me a little more on the design that you are doing.
http://www.cisco.com/warp/public/cc/pd/si/11000/prodlit/
or load balance on the 6500
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/tech/ios6k_wp.htm
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/tech/aslb_wp.htm
----- Original Message -----
From: "Yonkerbonk" <[EMAIL PROTECTED]>
To: "Wayne Lawson" <[EMAIL PROTECTED]>; "Tommy Mitchell"
<[EMAIL PROTECTED]>; "cisco@groupstudy. com (E-mail)"
<[EMAIL PROTECTED]>
Sent: Thursday, January 11, 2001 5:46 PM
Subject: RE: Any body know about Cisco Content Switch
Hi Wayne,
Could you point me to some information on the CSSes
and how to configure for load balancing? I was looking
at Local Director and Alteon boxes to do that for two
PIXs. Do I need them on both he outside and inside?
Thanks.
--- Wayne Lawson <[EMAIL PROTECTED]> wrote:
> Tommy,
>
> Actually you CAN have the CSS in an "active /
> active" mode
> with true firewall load balancing.
>
> Wayne Lawson, CCIE # 5244
> Systems Engineer - Cisco Systems, Inc.
> 2000 Town Center, Suite 450
> Southfield, Michigan 48075
>
> Voice: (248) 455 - 1663
> Cell: (248) 709 - 5797
> Pager: (800) 365 - 4578
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Tommy Mitchell
> Sent: Wednesday, January 10, 2001 8:15 AM
> To: cisco@groupstudy. com (E-mail)
> Subject: Re: Any body know about Cisco Content
> Switch
>
>
> Yes, they can unless you're trying to load-balance
> firewalls. Try to
> load-balance firewalls and you have to go
> active-standby.
>
> Tommy
>
> ----- Original Message -----
> From: "Muhammad Faheem" <[EMAIL PROTECTED]>
> To: "cisco@groupstudy. com (E-mail)"
> <[EMAIL PROTECTED]>
> Sent: Wednesday, January 10, 2001 7:26 AM
> Subject: Any body know about Cisco Content Switch
>
>
> > Hi All
> >
> > Just wanted to know that Cisco Content Switch
> (CSS-11000 & CSS-11800) can
> > work as Active - Active or not.
> >
> > Thanks for Input
> >
> > Muhammad Faheem
> > Systems Engineer
> > Afcomp
> > Hello : (9714)-3933878 / 3027338
> > Fax : (9714)-3933832
> > Web : www.afcomp.com
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - Share your holiday photos online!
http://photos.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]