If i do a sh isdn status and get the following:The
current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 96, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 97, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 96, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent,
spid1 valid
Endpoint ID Info: epsf = 0, usid = 61, tid
= 1
TEI 97, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent,
spid2 valid
Endpoint ID Info: epsf = 0, usid = 5, tid
= 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB: callid=0x0, sapi=0, ces=1, B-chan=0
Total Allocated ISDN CCBs = 1
but when i do a show dialer all call attempts show
FAILURE .... would this point towards problem with
isdn line??!
please help!
Beth
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]