Hello Beth,
Looking at your sh isdn status output, i think the problem is at layer 3. I
would suggest that you use the deb ppp neg and deg ppp auth. This should let
you know if authentication is successful and also the ipcp negotiation.
Also, you can use the deb isdn q931, this does give a lot of info.
As regards your wait for carrier timeouts, use the "dialer
wait-for-carrier-time 15" command on your dialer interface. I hope this is
helpful. Cheers
Cyrax.
"beth shriver" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If i do a sh isdn status and get the following:The
> current ISDN Switchtype = basic-ni1
> ISDN BRI0 interface
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 96, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 97, State = MULTIPLE_FRAME_ESTABLISHED
> Spid Status:
> TEI 96, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent,
> spid1 valid
> Endpoint ID Info: epsf = 0, usid = 61, tid
> = 1
> TEI 97, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent,
> spid2 valid
> Endpoint ID Info: epsf = 0, usid = 5, tid
> = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 1
> CCB: callid=0x0, sapi=0, ces=1, B-chan=0
> Total Allocated ISDN CCBs = 1
>
>
> but when i do a show dialer all call attempts show
> FAILURE .... would this point towards problem with
> isdn line??!
>
> please help!
> Beth
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
