Buy a SmartNet for $298 (which is what my 2511 contract cost). I had a
bouncing Serial interface & instead of a repairing the router, Cisco a unit.
Good Luck !!!
Phil
----- Original Message -----
From: "Daniel Cotts" <[EMAIL PROTECTED]>
To: "'info'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, January 13, 2001 7:04 PM
Subject: RE: troubleshooting a 2520 boot problem
> Can we assume that you have tried the same terminal software and console
> cable on a working router?
> Regarding power supplies. Sometimes the pins on the motherboard become
> covered with a residue. Use something abrasive to clean them before
> attaching the power supply. It has worked for me on PCs.
>
> > -----Original Message-----
> > From: info [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, January 13, 2001 2:03 PM
> > To: [EMAIL PROTECTED]
> > Subject: troubleshooting a 2520 boot problem
> >
> >
> > I've been reading from:
> >
> > http://www-ks.rus.uni-stuttgart.de/KSBE/cisco/data/doc/hardwar
> > e/access/2520/
> > ug/c2520trb.htm
> >
> > and
> >
>
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1903.htm#xtocid178
> 1610
>
>
> I have a 2520 router that when it boots the OK LED stays lit but the
> console produces no indication of boot activity. THe above articles
> suggest checking the power supply, so I tried a known working PS
> and got the same outcome.
>
> I tried reseating the chips on the board...and even booting without them.
>
> Seems like it must be a bad motherboard. Anyone have any other
> suggestions. Thanks!
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
