i got many following alarm from my terminal,and i run"sh int fa0"and "sh
run",but i
got different result about the duplex of int fa0,which one should i believe?
how can solve the problem?(int fa0 is a port on AS5300)
thanks,
Frank
08:22:57: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
FastEthernet0 (n
ot full duplex), with Switch FastEthernet0/12 (full duplex)
FastEthernet0 is up, line protocol is up
Hardware is DEC21140, address is 0002.fdcd.09c7 (bia 0002.fdcd.09c7)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:02, output 00:00:00, output hang never
Last clearing of "show interface" counters never
interface FastEthernet0
no ip address
duplex full
speed auto
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
