<html><DIV>ppl.</DIV>
<DIV>could a catalyst 5500 expert please help me out here.</DIV>
<DIV>i have 2 cat 5500s. there are 12 vlans set on each one</DIV>
<DIV>they are connected via an isl link, and each cat has an rsm at the bottom</DIV>
<DIV>vlan 3 is the printer vlan</DIV>
<DIV>on sunday, there was full connectivity between all vlans..i.e everything could
ping everything else.</DIV>
<DIV>today however...if i plug the printer into the second catalyst switch...the RSM
in switch 1 can ping it....but the switch itself CANNOT!</DIV>
<DIV>it times out..and there seem to be no config changes at all! ive made sure the
port is ok, its not channeling or anything...but no luck :(</DIV>
<DIV>the problem seems to be on the second switch...if i attach the printer to swtich
1, then both rsms and both swtiches can reach it...</DIV>
<DIV>the thing is...if there was a probl;em with the port in switch 2, then surely the
RSM wouldnt be able to ping it...and it can ping it fine!!</DIV>
<DIV>so to recap</DIV>
<DIV>plug printer in switch 1...both RSMs and switches can ping it</DIV>
<DIV>plug printer in switch 2...both RSMs can reach it, but one switch cannot..</DIV>
<DIV> </DIV>
<DIV>any ideas ?</DIV>
<DIV> </DIV>
<DIV>regards</DIV>
<DIV>mark</DIV><br clear=all><hr>Get your FREE download of MSN Explorer at <a
href="http://explorer.msn.com">http://explorer.msn.com</a><br></p></html>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
