I am using a WIC1-DSU-T1 cards...the pysical interface
is RJ-45 and CSU and DSU is built-in....
Regards/Sampath.
--- Bob Johnson <[EMAIL PROTECTED]> wrote:
> Are you using a T-1 x-over cable to connect the 2
> T-1 cards?
> You need a cable with pins 1-2 crossed to pins 4-5,
> pins 4-5 corssed to pins
> 1-2...
> Are the line coding settings the same on each?
>
>
>
>
>
> -----Original Message-----
> From: Sampy Ren [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 17, 2001 8:23 AM
> To: [EMAIL PROTECTED]
> Subject: Connecting 3640s
>
>
> I am trying to connect two 3640's back to back
> through
> their WIC1-DSU-T1 cards. On one iam defining Clcok
> source internal and in the other clock source line.
> the status is up down. Encapsulation : HDLC.
>
> Any idea what could be the problem?
>
> Regards/Sampath.
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
