Do a show conf and see what it's specified to boot from.
You can do a:
Router#conf t
Router(config)#no boot system rom
Router(config)#boot system flash
Router(config)#end
Router#wr mem
Router#reload
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Hubert Pun [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 17, 2001 8:14 PM
To: Cisco Study Group
Subject: boot from ROM
Hi,
Below is my frame relay switch. It is booting from ROM. The config
register is still 0x2102. I know that there is xmodem method for 3620.
However, what should I do for this Cisco 2522?
Thanks
FR-Switch(boot)#sh ver
Cisco Internetwork Operating System Software
Cisco Internetwork Operating System Software
RE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Fri 27-Dec-96 17:33 by loreilly
Image text-base: 0x01010000, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
FR-Switch uptime is 5 minutes
System restarted by power-on
Running default software
cisco 2522 (68030) processor (revision M) with 2048K/2048K bytes of
memory.
Processor board ID 06198817, with hardware revision 00000003
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
8 Low-speed serial(sync/async) network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
Configuration register is 0x2102
FR-Switch(boot)#
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]