you can find out by using the show port capability command. the stuff below
is from a cat 5000 with a 5213 blade
dave h
test-cat> sh port cap 2
Model WS-X5213
Port 2/1
Type 10/100BaseTX
Speed auto,10,100
Duplex half,full
Trunk encap type ISL
Trunk mode on,off,desirable,auto,nonegotiate
Channel no
Broadcast suppression pps(0-150000)
Flow control no
Security yes
Membership static,dynamic
Fast start yes
Rewrite no
-----Original Message-----
From: Jason T. [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 18, 2001 4:01 PM
To: [EMAIL PROTECTED]
Subject: Fw: Hard/software requirement
The model I have is WS-5213 (12-port 10/100BASE-TX Fast Ethernet RJ-45).
Does this support trunking?
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> A lot of older catalyst 5000 blades don't support either trunking or
> etherchannel. What is the exact model number of the blade? If it
doesn't,
> upgrading to a new supervisor won't do anything for you.
>
> -----Original Message-----
> From: Jason T. [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, January 18, 2001 1:59 PM
> To: [EMAIL PROTECTED]
> Subject: Hard/software requirement
>
>
> Hi Group, does anyone know what's the minimum hw/sw requirement to set up
a
> trunk port? I have a cat5500 with Supervisor Engine I running s/w 3.2(1b)
&
> a 12-port 10/100BASE-TX Fast Ethernet blade running s/w 3.2(1) connecting
to
> a FastEthernet on a cisco 7204. I cannot get trunking to work. The
switch
> doesn't understand "show port capabilities". Do I need a Supervisor
Engine
> II in order to do trunking? Thanks.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]