I have a problem with a Cat. 6509. We are running Ethernet ports are set to:
speed: Auto, Duplex: Auto. User�s NICs are set (speed/duplex) to auto. A user
had reset his NIC, when out of the office to 100/Full. When he connected to our
network, the port he was connect to locked(port light was amber) and the switch
locked as well. We disconnected him and rebooted the switch. All is fine
His setting causing his port to lock is one thing, but the Cat. should have
remained operational. Does anybody have any ideas? The Cat�s �SHOW VER� is below
show vers
WS-C6509 Software, Version NmpSW: 5.2(1)CSX
Copyright (c) 1995-1999 by Cisco Systems
NMP S/W compiled on Apr 8 1999, 11:35:52
System Bootstrap Version: 5.2(1)
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCAxxxxxxxxxxxxx
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP1-2GE SAD03384734 Hw : 5.0
Fw : 5.2(1)
Fw1: 5.1(1)CSX
Sw : 5.2(1)CSX
Sw1: 5.2(1)CSX
2 48 WS-X6248-RJ-45 SAD03401220 Hw : 1.1
Fw : 4.2(0.24)VAI78
Sw : 5.2(1)CSX
3 48 WS-X6248-RJ-45 SAD03431572 Hw : 1.1
Fw : 4.2(0.24)VAI78
Sw : 5.2(1)CSX
6 48 WS-X6248-RJ-45 SAD04160E1A Hw : 1.2
Fw : 5.1(1)CSX
Sw : 5.2(1)CSX
7 48 WS-X6248-RJ-45 SAD035002FS Hw : 1.2
Fw : 5.1(1)CSX
Sw : 5.2(1)CSX
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 17067K 48341K 16384K 3828K 12556K 512K 203K 309K
---------------------------------------------
This message was sent through IDT.
http://www.idt.net/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
